High Power Segment LEDs

About

STARLITE is a lighting design and fixtures company which can provide high power segment fixtures with high heat dissipation and low usage cost. Based on 3-Pad LED Flip Chip and Pillar MCPCB technologies, both junction temperature and thermal decay are minimized due to its extremely low 0.006°C/W thermal resistance, allowing over 120,000 lumens to be emitted from a single LED COB module. The new Apollo 1200 high performance COB modules enable energy-efficient LED technology to replace metal halide lamps in extremely high power lighting applications such as  high mast, stadium lighting, airport and shipping terminal lighting, maritime lighting, and more. Extremely Low Thermal Resistance Thanks to 3-Pad Technology STARLITE adopted the latest US patent 3 PAD technology (low heat Resistance/low manufacturing cost/fastest heat dissipation) to successfully reduce the dimensions of the COB as well as radiator material cost for the high-power segment. Unlike conventional LED modules that must dissipate LED heat through MCPCB’s thermal-resistant dielectric layer, Flip Chip Opto’s 3-Pad technology creates an extra thermal pad beside two electrode pads, and uses it to couple the heat directly from LED into the metal core of the underlying MCPCB. This innovation results in incredibly low thermal resistance that enables the feasibility of brighter output, less thermal decay, longer service life, and the coordination with smaller heatsink. Suitable for Very High Wattage Applications The incredible thermal performance allows the Apollo 1200 to achieve lumen output between 107,080 and 121,680 lumens at 1200 Watt depending on the choice of color temperature (CCT) and color rendering index (CRI). Such unparalleled brightness from a single LED COB enables LED lighting to penetrate into the high power/wattage market including applications such as high mast lighting, stadium lighting, airport and shipping terminal lighting, maritime lighting and more. More Lumens Per Dollar Lower thermal resistance presented by the 3-Pad technology not only minimizes the thermal decay but also boosts the brightness by allowing more driving current while still maintaining LED junction temperature (Tj) below its thermal threshold. Compared to conventional wire-bonded COBs, Apollo 1200 of 3-Pad technology is able to sustain higher driving current with minimal Tj increase, and therefore produce more light under the same Tj restriction. Meanwhile, lower thermal resistance also exhibits the opportunity to coordinate with a smaller heatsink that represents less cost in material and shipping/handling. High Quality Illumination with Even Light Distribution Apollo 1200 is manufactured with a Light Emitting Surface (LES) of 90mm to generate powerful, smooth and evenly distributed lighting from a single LED COB. Standard CCT values include 2700K, 3000K, 4000K, 5000K and 5700K along with CRI value as 70+, 80+, 90+ and 95+. In addition, 95+ of R9 and R12 are also available upon request. Features •         Patented 3-Pad COB Technologies for extremely low thermal resistance •         1200W Maximum Power •         Extremely High Output to 121,000 Lumens •         0.006 C/W Thermal Resistance •         CCT between 2500K and 6500K available •         80+, 90+ and 95+ CRI available, as well as optional R9=95+ and R12=95+ models •         90mm Light Emitting Surface •         Robust COB design and circuit connection. Stand up to severe impact and pressure •         Patented components and technology •         Fully in-house manufacturing and production Starlites lighting fixtures as a total solution provider to yield myriad business opportunities for the industry and associations.